Quick Answer: How To Lubricate Motorcycle Chain?

What is the best lubricant for motorcycle chain?

The Top 3 Chain Lubes

  1. Motul C5 Chain Paste. For over 150 years Motul has produced premium oil and lubricants.
  2. WD-40 Motorcycle Chain Lube. WD-40 Specialist Motorcycle Chain Lube, like all their products,is an easy to apply synthetic formula.
  3. Motorex Racing Chain Lube.

Can I use WD40 on my motorcycle chain?

So, can I use WD-40 on my motorcycle chain? It is highly recommended that you do not use Multi-Purpose WD-40 on your motorcycle chain. The WD stands for Water Displacement, and it is designed to disperse water away from metal parts to prevent rust.

Do motorcycle chains need lube?

Standard motorcycle chains need a lube that creeps in between the sideplates rollers and pins, but those same properties can help it get past O-rings and ruin the sealed-in grease. O-ring chain lubes need to protect the O-rings and outside of the chain.

Is WD40 bad for bike chains?

Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant since it’s primary use is as a solvent or rust dissolver.

You might be interested:  Often asked: What Size Motorcycle Do I Need For My Height?

How often should you oil your motorcycle chain?

A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.

How often should I lube my bike chain?

If you are a frequent rider, using your bike several times throughout the week, your bicycle will benefit from a regular cleaning and lubrication of the drive chain. Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection.

How long should motorcycle chain last?

But chains wear out over time and need replacing. So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can will last 20,000 to 30,000 miles, sometimes more. But, some last as little as 5,000 to 10,000 miles.

What should you not use WD-40 on?

Accepted Answer: Firearms, Drive Chains & Gears

  • Firearms – You should never use WD – 40 to clean or maintain firearms.
  • Drive chains of any type – Because WD – 40 isn’t a lubricant, it really will not work well on drive chains of any type.

Can I use olive oil on bike chain?

The short answer is yes and no. Yes, because an extra virgin olive oil on a bike chain is better than no oil at all. Olive oil will never be as effective as proper lube oil, but it can help a lot when you are in an emergency situation.

You might be interested:  Question: Which Motorcycle Colour Is Best For Maintenance?

What happens if you don’t lube your motorcycle chain?

If the chain is not lubricated it will wear prematurely. The chain does not stretch but grows in length as the pins and barrels wear. This has the effect of changing the distance between the rollers.As the chain grows it will no longer match the pitch of the drive sprockets, the sprockets will wear out prematurely.

Can I use engine oil as chain lube?

Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. Whereas engine oil lasts only for a few days which reduces the life of your chain and sprocket.

Can we apply grease to bike chain?

Backpedal a few revolutions, then use a clean rag to wipe off any lube that didn’t work its way into the bearings. It can get messy, so use sparingly. Never Use: Grease —it’s way too heavy for this application, and it will gunk up pulley bearings and attract crud.

What household items can I use to clean my bike chain?

Soap / general cleaner: Use diluted dishwashing soap or preformulated bike wash cleaner for frame cleaning. Degreaser: A bike -specific degreaser (avoid kerosene or turpentine) will clean up gummy parts like your bike chain. Choose a solvent that is easy on the environment (and you). Dispose of all solvents properly.